Saturday, October 13, 2012

Ag Meets Art Progress

Making "Art" out of Apple Bins
Last weekend I got a bit more work done on my piece for the Ag Meets Art fundraiser for Larson Gallery. I also got sick and missed class, so I didn't get much done. I had already covered my board with mulberry paper and I had thrown the pieces during the summer. I glazed and fired the pieces during the first week of classes. Last weekend I just attached the main parts during a brief period of energy in the midst of a very tired and crummy weekend.

board on a messy floor with thrown flower forms supported on thrown mechanical parts
the central flower and mechanical part set is raised on a SRAM bike part from my summer project
the black pieces were also based on SRAM bike parts

I think the piece needs more than just the five red thrown sets but I haven't entirely decided what that something more should be. My daughter volunteered her help while I was sick and I allowed her design to sit in place during the remainder of the week. Just this evening I played around with a few new arrangements of basically the same parts I was thinking of including when she got involved. 

my daughter's plan includes parts tossed into the red flower forms
I like the idea of a clay "stamen" inside the flower but not so much the random parts inside too
maybe a bunch of color all around the base is good
I could put other parts inside the "flowers" so the interior level is hidden or obscured  

I could leave that interior space entirely open
maybe I should cluster the extra parts a little more closely together
ah, forget the bike parts, fake gears are the way to go
fake gears and random springs
limited color palette

Sunday, October 7, 2012

Swelling Curves with Thrown Forms

I recently subscribed to Ceramic Arts Daily e-mails. I have gotten Ceramics Monthly for years and I occasionally buy Pottery Making Illustrated (though with no Borders or Barnes & Noble in town it's harder to buy on a whim than it used to be). I was looking online for something else when I signed up for their e-mail. I figured it would just fill my in-box with more junk that I'd have to delete, but I tried it anyway.

Contrary to my expectations, the latest of these e-mails was relevant to discussions I'd been having with my intermediate and advanced clay students and will probably provide me with a useful new teaching tool. This quarter I have some motivated students in the higher levels of ceramics and I think it is going to be important (and perhaps tricky) to keep these students challenged. At the last two NCECA (ceramics) conventions I was particularly taken with thrown and altered works like those by Deborah Schwartzkopf who demonstrated at NCECA 2011 in Florida.

works by Deborah Schwartzkopf at NCECA 2011 

my not-very-useful images from the NCECA demonstration

I attempted to show, explains and demonstrate some of her techniques for altering her thrown work, but  I'm not sure my short demonstrations captured the energy and smooth curves of her work. Part of the problem is that I had difficulty getting students to understand why they would want to emulate her techniques. Beginning clay students are so focused on making things round and functional that they tend not to look farther than techniques for making things round, fixing things that aren't round and attaching handles.

more work by Deborah Schwartzkopf
I admit, I find these altered forms most interesting because of the techniques. I don't own much work like this and I don't spend my limited throwing time at home making it. But I think it is interesting to work with wheel throwing techniques and end up with smooth curvy asymmetrical forms that swell and bend. My own sculptural work often uses smooth, curvy asymmetrical forms that swell and bend, though I reach these curves and swells through different techniques and the end results are not meant to be functional.

From NCECA 2011, my notes say this is by Glenda Taylor, though all the work I can find from her online suggests this is not her work (looks a bit like Schwartzkopf's work, really)
interior of the mystery Glenda Taylor/Deborah Schwartzkopf piece

I believe my current intermediate and advanced students can appreciate the forms and the combinations of techniques and might consider integrating some of the techniques in their own work. The latest Ceramic Arts Daily e-mail included a link to a video clip from "Creating Curves with Clay with Martha Grover." The clip is short, under 15 minutes out of a 3 hour video, but I found it to contain some highly useful information. I'm going to try to order the whole video for class.

The general information in the clip is not new to me, but the artist demonstrates all the steps slowly and clearly and she carefully explains what she is doing and why. The most useful tip for me was that she used a paintbrush to smooth the slip on the interior seam of her attachments. She also shows and explains how and why she bends the rim and edges of the bottom edge. I think the video clip (and eventually the video) might help my intermediate and advanced clay students see both why one might use these techniques and how subtle changes in technique can result in smooth, elegant hand-built and thrown forms.


Sunday, September 30, 2012

A Beautiful Pairing: Ag Meets Art

I am making an artwork from a piece of old apple bin for a fundraiser for Larson Gallery. A group of artist from the area have taken pieces of apple bins, mostly 12" x 12" boards to make a piece that will be auctioned for "A Beautiful Pairing: Ag Meets Art."

 


I think the fundraiser promises to be fun, but I am most interested in seeing what other artists have done with the apple crate pieces they are using. A few artists had their boards done and on display at Larson Gallery's Membership Open House last week. To see an example of the board before and after an artist's alteration, click here.

I took a board and let it sit for most of a week before I decided what to do with it. I am probably going to use some of my leftover SRAM project pieces in the piece. (I can't imagine working 2-dimensionally.) I haven't decided how much I want the board to show. This project should be about the board to some extent but, on the other hand, it is really just a weathered board. I do have a number on my board, perhaps I should plan to incorporate the number into the design to connect my piece to the project inspiration rather than just using what's on my mind for inspiration.

the leftover SRAM pieces, before firing, resting on the board
the corresponding SRAM pieces as used in the bike part project
The leftover SRAM pieces I have in my mind or, literally, just sitting around the studio were extras I made to be used in my third, large SRAM piece. I threw red flower-like shapes and I threw some clay replicas of threaded metal bike parts.

clay pieces are meant to look like the metal bike part in front
fired SRAM pieces
Earlier in the week my daughter helped me cover the board with a semi-transparent layer of mulberry paper. This obscures the board but doesn't entirely cover the wood grain. It also makes the board less likely to cause slivers. The board I took has a partial crack in one corner which I didn't want to have become a problem for the structure of the piece. The back side has a couple other elements, like the heads of bolts or nails, that could be integrated as part of the visual elements of design I create.

the mulberry paper color is similar to the original board color, some text and grain is visible through the paper

crack on one corner
bolt end and bolt hole visible on the back side
The event is a couple weeks off on October 19. I suppose I will decide how to proceed before then. I will post pictures when I have decided.

Thursday, September 27, 2012

First Week of Classes

The good news is that this week I added about 25% to the large sculptures I finished this summer. The bad news is I finished one. I fired it this weekend and had to take slides in the middle of the week after class. I usually take slides early in the morning when the sun is rising, but the sun is rising after I go to school now, so I had to wait until sunset.


I guess I'm pleased with the piece, though I wish I had done something surprising in the interior. You can't see from this angle, but it is just the interior of the sculpture, visible until the sculpture bends and you can't see down anymore. I may still consider some alterations.



I have a few more pieces around the studio that are at some level of finished. I hope to get them fired during the school year but I'll need to sneak in time to do so. So far meetings and class preparation has essentially exhausted all my work time and my daughter's activities, cooking dinner and cleaning enough to keep the house habitable have managed to fill almost all my excess time this week.

sculpture still needs another layer of underglaze and over glaze before firing

whistle from...maybe January

I finished up some of my mini-sculpture or one piece a day project from the past spring. I have decided not to continue this project during the fall. Instead I have a rather extensive list of things I need to get done in the studio, like glazing most of the mini-sculptures, that I will break up into smaller bites. I will still try to set aside studio time every day or most days. So far this week I spent time in the studio on the weekend and Wednesday evening.

mini-sculpture project

I've also got a few odds and ends around the studio, parts of projects that I planned to or still plan to finish. I have a show next January (2014) for which I want to make 100 small forms. I could do them during the summer but I am hoping to make some progress during the year. I started them this past summer. 

leftover SRAM project clay pieces

 
I plan to make 100 of these guys

Saturday, September 22, 2012

SRAM the Third

Though I finished the SRAM pART Project early in the week and shipped out the piece for that project, I didn't finish the supports for the third piece until later in the week. This piece was the last I made and the largest and most awkward to fire (since my kiln isn't quite large enough for it to lay or stand unsupported).

Third SRAM sculpture finished with supports attached

This piece requires the SRAM supports to stand up. It was designed with this support in mind. I was thinking of the logical function for the bike parts and wanted them to be more functional than decorative in this piece. I made four clay bases for the support and had to alter the bike parts to fit in two of them at the right length and the correct angle.

"back" view of third SRAM sculpture

I had originally planned to make the supports removable for easier shipping, but I would have had trouble getting the red support to stay in the slot at the top if it were only epoxied to the base. I was also concerned that if I shipped the work in pieces, it would be difficult for someone to set it up correctly. I ended up epoxying all three supports to the main form and to their ceramic bases.

Third SRAM sculpture with four green pieces inside red thrown forms

Four bases that touch the ground or table makes this an unwieldy piece to transport. As I worked on the piece, more and more it seemed to grow and become more fragile with pieces sticking out at strange angles. I plan to enter it into juried show, but perhaps only ones where I can deliver the piece myself.

unfinished alternative without green parts inside red thrown forms

At the last minute of making the piece I was debating between leaving the four red circle parts open to show the orange base form and the bike parts or covering the openings with ceramic covers. I had made  several versions of the covers for this form and for the base of the gear sculpture (below). After I added the tall black bike parts, the red thrown forms no longer fit snugly on the bike parts. I considered using the extra red thrown forms to aid in attachment.

Gear SRAM base with different green "caps" on three protruding SRAM parts

I ended up asking my family for their advice and after answers from my parents and my daughter and some family friends, I added the green shapes permanently to all four thrown forms. Later my brother and sister-in-law and their friend recommended I leave the green parts off.

Gear SRAM Sculpture stacked on base

Though earlier in the week I photographed the gear SRAM sculpture, I didn't hadn't finished epoxying all the parts in correctly. I finished it later in the week and am still considering showing the base and the top section separately. Right now they simply stack and I do not plan to make their union epoxy-permanent.




Monday, September 17, 2012

Finished (sort of) with bike part project


I am officially "finished" with my SRAM bike pART project. I took slides digital-images-for professional-use this morning and I think I can start packing one piece today and ship it off tomorrow. However, only the one piece was actually done this morning when I took slides, I epoxied supports for the other two (back up pieces) today. 


First SRAM Sculpture
The first SRAM pART project piece will probably be the one I send (I haven't quite decided, actually). This one was done this morning. I took some images without the base, but the red piece ends up touching the table or ground and I this isn't what I imagined.


I will show it with the base because the piece is more sturdy on the base. I am mostly happy with the piece. Now that it is attached, the highest part reminds me of a beanie cap with a propellor. The pieces sticking out were meant to resemble stamen on a flower petal, though the scale is unusual. 



The piece has 4 black bike parts on the base, 8 red, yellow and black pieces decorating the lowest part of the form, 1 metal bike part as support for the red sprigged piece in the back and 4 blue and silver gears along the stem of that red sprigged piece. There are 4 round hollow bike parts on the low red attachment and 1 white bike part which is the attachment for the red part. Inside the flower petal are 2 bike parts with 1 green one supporting the red and chartreuse piece that comes out of the flower and 3 bike part "stamen" at the top for a grand total of 28 bike parts and 4 separate ceramic parts.




Second (Gear) SRAM Sculpture
I photographed this piece without a base at first. I might consider showing the piece like this if I don't send it in to the SRAM pART Project. It only has 8 bike parts incorporated (four at the top, three gears and a "support" for the pod at the bottom.  The surface is also decorated with sprigs made from small SRAM gears.



If I send the piece to the SRAM pART Project, I will add the base to increase the quantity of bike parts. The base as pictured below has 11 bike parts, though I have since added 2 more and will add another 1 after my epoxy has set. There are 2 cranks on either side of the base, and 6 bike parts make up sets with two bike parts and one green clay cap each around the base. The center includes a green bike part and five metal supports, four of which are cut from 2 SRAM bike parts. The other came from my husband's parts stash and is, I believe, a fuel line.


I took this picture this morning before the whole thing was epoxied. I was a little scared stacking it together before it was all attached and stable. It feels very tall when I stack the pieces together, though it is only about 20" total. I am considering shipping this piece to the SRAM pART Project.




Last, Largest SRAM Sculpture
As of this morning, I hadn't quite decided what to do with the supports. I took a couple images with the pieces merely balanced. I did worry that I would bump my table and send the whole piece to the ground. As it was, I did knock into one of the recently epoxied pieces and snapped it, but I have since re-epoxied and replaced the piece. My biggest project today was cutting down the black support on the right and angling the base of the red support in back. Assuming my epoxy dries well, I will take "real" images of this piece tomorrow.