Saturday, September 15, 2012

SRAM penultimate post?

All I do now is epoxy. Somehow attaching 25 bike parts for each sculpture doesn't seem like that much. Attaching 75 parts starts to sound like a lot, but many of these pieces have to be attached to two or more ceramic parts. The epoxy takes ~24 hours to fully cure, so I've also spent a lot of time waiting for it to dry and taking pictures. The epoxy is actually pretty stiff after only a few hours, but I don't really want to test the limits and risk disaster.


The gear part sculpture is pretty far along, but I am waffling as to attaching the base to the top section. I added the base to up the quantity of bike parts, but I am thinking of keeping the two parts separate. I had originally intended to add more bike parts to the very top section of the gear sculpture, but if I don't use it for the SRAM pART project, I don't need to have as many pieces and I might skip these attachments.
gear SRAM sculpture without the top part
mostly complete top of gear sculpture
upside down base of gear sculpture
right side up base of gear sculpture. wooden sticks and baby food jar lid are temporary spacers.
clay ends being epoxied to bike parts
testing attachments for gear sculpture base


The third bike part sculpture is posing more problems, one of which is that I seem to have counted wrong. The current set-up only seems to have 24 bike parts included. I'm not sure what I missed or how I counted incorrectly. This piece would have been unwieldy to ship and was unlikely to go to New York anyway.

first bike parts attached to top of sculpture

bike parts attached near sprigs made from said bike parts
first thrown form decoration attached to bike part attached to base
painters tape to hold bike parts in place as epoxy dries
base of sculpture after tape removed. More bike parts will be attached and more thrown forms

First SRAM Sculpture
The first sculpture is, ironically, the one I will probably ship to the show in New York. It is small, compact and It appears that I will easily reach 25 parts. Currently 15 bike parts are attached to the main form, five more are attached to another part that will be attached soon. Five more will be attached soon and I have five more optional pieces I might attach. I also created a base to help keep the form stable. The base has four more bike parts attached to it.

form with drying epoxy
some epoxy has dried and tape has been removed. Red form will be attached but it currently balanced in place with at tape roll and towel

two of three wings or stamens attached to clay form which will attach to another bike part on the form

base with bike parts taped in place

I hope (and plan) to have the pieces finished by Monday and final pictures up after that.

Wednesday, September 12, 2012

Beginning to Epoxy (like glue)

Finally, I have some glazed work out of the kiln and I have begun to attach bike parts. I was beginning to worry about my impending deadline (things are supposed to be shipped next week) and was starting to have trouble sleeping. (Usually at this time of year I have bad dreams about forgetting to write my syllabi for the first day of class. I haven't even started thinking about syllabi yet because of the incomplete bike parts project.)

Today I loaded what I hope to be the penultimate glaze firing for the bike parts project. Immediately after I unload tomorrow morning, I should be able to load and fire the last batch, most of which are already glazed. The only sticky point is that I have one piece in the kiln today which needs to be glazed and reloaded for this project. I hope to finish it early tomorrow morning so I can load it tomorrow and have that be the last firing for this batch of work.

wiping off a layer of underglaze on my largest bike part sculpture
This morning after my daughter helped me unload the kiln (She likes to take out the small pieces. I can tell which pieces she likes best because she picks them up first; she usually grabs the shiny glazed pieces first), I finished glazing my largest SRAM bike part piece and loaded the kiln again.

this is what happens when you give the kid the iPhone to take a picture
This biggest piece takes up most of the kiln, so I didn't have much room for the rest of the pieces which were ready, though I had to fit in a piece that was just bisque fired yesterday. This piece requires two firings and some epoxy, so there is no time to lose. The piece is a support that I created late in the summer for the original bike part piece.

chartreuse underglaze layered over red shell sprigs. the chartreuse was wiped away after this photo
After I loaded the kiln, I finished underglaze layers and glaze overspray for the first bike part piece and sprayed glaze on some other small parts and mini-sculptures that have been waiting for glaze since early in the summer. Currently all the bike part pieces save the aforementioned support have been glazed and are either in the kiln or waiting to get into the kiln tomorrow. I have a significant amount of unfinished work in the studio but at less than a week before the work needs to be shipped and just over a week until fall quarter classes begin, I can't spend time on these pieces yet.

silver SRAM bike part epoxied to ceramic form
After a run to school to pick up my long neglected Dremel tool (I rarely use it during the year and students always ask to borrow it), I was able to start epoxying my gear bike part sculpture together. The silver "support" was the first one I attached to the base of the sculpture. I needed the Dremel to mitigate my measuring and shrinkage errors. Hopefully there won't be too many of these errors to contend with. 

epoxy on second layer of gear sculpture

This gear sculpture was designed in sections that are interspersed with bike gears. I used a large batch of PC-7 epoxy to fill in the interior space of the first gear. (PC-7 was hard to find this week. I had some at home already, but went to Home Depot and Lowe's to supplement my supply. I've purchased PC-7 there in the past, but apparently Yakima/Union Gap is too small an epoxy market for this stuff. When I asked a Home Depot employee for epoxy, she asked if I meant glue. She'd never heard of PC-7 nor had anyone else at the store. The Lowe's guy seemed confused by the idea that epoxy might come in a form other than liquid or putty. Ace, however, is the place.)

thick layer of epoxy paste on second layer, gear on third layer ready to attach

PC-7 is a black epoxy paste. I believe it is recommended for car engine repair. It goes on thick and doesn't really move while it dries, though it takes about 24 hours to set firm. I put a layer around the interior seam of the sculpture form and then put the two pieces together with the gear in between. The gear squished into place on the epoxy. Then I removed the top part of the ceramic piece and filled in more epoxy paste before reattaching the ceramic top with more epoxy. One of the ceramic forms has a hole, the other has a tube that fits in the hole to help keep the two parts together and keep the gear in place. This may have been unnecessary engineering on my part but it adds some stability during this stage of the process.

two gears and two ceramic forms
Though I have the first three sections of this form out of the kiln, I decided to let the first and second sections set together while the third has only the gear on top. I was concerned the weight of the third section might shift the alignment of the seam below. It probably wouldn't but if it does, I'm stuck (epoxy humor).

metal bike part with red thrown ceramic form (behind are others waiting to compete with similar parts in the kiln for the best fit)

I had a few other small parts to epoxy together but I tried Goop glue. I usually use two-part 5-minute epoxy for small attachments with more visible seams, but I was curious whether the Goop glue was better. I tried it on one SRAM part that attaches to a round red clay part and will also attach to the largest bike part sculpture. I only tried one of these with Goop but I think I don't like it. I will wait to mix up the 5 minute epoxy until I have more parts out of the kiln tomorrow.

At this point I think I should be able to get most of the work done this week. Next week I can take "slides" and have the work shipped by the middle of the week. I am making three bike-part pieces, even though only one is required by the project. All along I have been expecting (or maybe just worried about) trouble. I have been working on three pieces so that one will be left if there is a catastrophe (or two). Now I am starting to think about ease of shipping instead. 

It will also be strange, after spending so much time with these pieces this summer, so send one away so quickly after it is completed. We will barely have any quality time to enjoy each other's company as fully realized objects.

If you are interested in seeing previous SRAM bike projects by other artists, click this link.


Did you know you can now comment on my blog without signing-in? Tell me what you think. (Do you also anticipate impending catastrophe?)

Friday, September 7, 2012

Video Editing

My week has been minimally productive in the clay studio, but I have gotten some work done for Larson Gallery.

My daughter got sick at the end of the week. They sent her home last week too, but that illness was imaginary. Unfortunately this time it was authentic. I've sat on the couch with her for two days. Luckily kilns don't require constant attention and I was able to bring some pieces out to the living room and underglaze when she napped.

I did a little glazing in the evening and loaded a kiln that I fired today. I should have the results tomorrow and three fifths of the clay parts for my gear sculpture will be glazed, fired and ready for epoxy and bike parts.

layers of fired underglaze

this glaze (that will be matte after firing) looks white when applied


The rest of my week seems to have been spent learning now to make videos for Larson Gallery. Since March have been making videos of throwing techniques to post on my YouTube channel for my students, but these videos only require a camera and a tripod. I narrate while I throw and the video gets posted with minimal editing.




This Larson Gallery video ended up being more of a challenge. We wanted a video of Joe Feddersen's show being installed in the gallery to share on Facebook and our blog so people could see what goes on in the gallery when it is closed to the public. I was going to take video of the show being hung, but my daughter's illness was ill-timed and I couldn't get to the gallery on installation day. Luckily I had gone in earlier in the week and had some short video of the show being unpacked.

With my original plans thwarted, I was forced to make a new plan. As it turned out, I didn't have much of a plan for what I wanted to say or even much idea how the video should look. After viewing my video clips, I spent some time outlining the video on paper before I actually started moving anything in iMovie. When I film a throwing demonstration, I don't have to think much. Throwing a bowl while narrating my process is pretty automatic for me at this point, so I don't have to have a plan more detailed than "throw a bowl."

I quickly discovered that a script was essential to ensure I didn't sound ridiculous. I also needed to teach myself how to add a voice-over since my video from the gallery included unrelated conversations about summer plans.

My first attempt was actually not too bad. I added a scripted voice over and I only included one verbal stumble (I recorded over the other mistakes). I also figured out how to add in still images and even change the length of of the still image or how it is viewed.



Only an hour or so after I posted it, I realized that I had included one film clip twice (she's moving the same table twice). I also got some helpful suggestions from my father, not all of which I was able to include in this version, but some I can use next time. I added a picture of the artist and did a slightly better job of lining up the images with what is being said at that time.



I learned a lot doing the video. It also took me about 4 hours of actual work time. In real time I started Tuesday morning and finished Friday evening. I look forward to doing more videos (ones that look more professional) with my new editing, scripting and planning skills.

Tuesday, September 4, 2012

Recent Studio Pictures

Not much time to write a post this week, so this one is just some random stuff from my studio.

Underglazing
Applying fresh underglaze layer over fired underglaze.
grey underglaze over the stippled surface behind the blue sprigs (some of the grey bled over onto the blue sprigs)

blue and red underglaze has already been fired

wiping away grey underglaze from blue sprigs and partially wiping from stippled background to highlight texture

ready for next firing or next glaze layer

Wheel Modification
I had some trimming to do last week but the trimming scraps kept flying around the studio. I'd already vacuumed so I set up this large piece of cardboard to catch the trimming scraps and keep them in the splash pan.


It's hard to take a video of something that is essentially blocked from view. Also someone filled up my camera card with tons of pictures of a motorcycle.




Last Wet Clay Day in the Studio
I tested out some more bike parts for the base of one of my sculptures. Looks a little busy, eh?

base for a SRAM bike part sculpture: this one

Speaking of busy, these guys are meant to be end caps for some of the bike part sculptures. I finished them Friday and they are in the kiln today. The surfaces are bunches of sprigs.
sprigs from seashells on small hemispheres
 And
Yakima got a new piece of art downtown by Jimmy John's. I like it.

Thursday, August 30, 2012

Third SRAM Bike Part Sculpture

The third of my major SRAM bike parts projects is nearing completion. This piece is the most complicated of the three I have done. I finished building the main form in early August. After vacation I threw some supports to hold the main form upright. In September I plan to finish glazing and attach the bike parts.

SRAM bike parts
I started with a general idea for the form, though I started building before I first sketched my plan. Early on I knew that external bike part supports would be part of the design. Before starting this project I had been thinking about the reason for integrating bike parts. Of course I started incorporating bike parts because I am going to be in a show that requires that artists use bike parts. But the bike part project coincides with an existing interest in integrating mechanical parts. 

I started to think about why, logically, bike parts might be integrated into my work. My usual forms are organic, abstract interpretations of exotic plants, microscopic organisms and undersea fauna and flora. How might bike parts, or mechanical parts in general, come to be incorporated into these plants and animals?

early sketch showing mechanical support

Part of my answer stems from the logic of science fiction and Steampunk. I am thinking particularly of ways in which mechanical elements might conceivably be used to "improve" or repair organic forms. I developed a more refined picture of what organic / mechanical integration might look like this summer while reading "Cinder" by Marissa Meyer. The cyborg main character has mechanical body parts that replaced damaged limbs. These man-made parts integrate with her organic body. The descriptions in the book are vivid and helped me envision some ideas for my own work. Of course in the real world prostheses function this way, as man-made tools to support missing limbs of an organic being.

early stage in building, with bike parts positioned as supports
So in developing my plans for this project, I tried to think about how my psuedo-organic forms might need to be supported. An obvious place for support would be in increasing stability, both to hold the piece upright and to support attachments or top-heavy elements of the form (like a halo neck brace supports a broken neck). 

later sketch showing possible combination of thrown clay and bike part surface decoration patterns

clay wads to plan spacing for parts to be added later

thrown forms for decoration shown above (thrown forms at front left are meant to mimic bike part at front left)

I also thought about the functional, defensive or reproductive functions of a plant form and why a form might need different segments or separated functions. My sculptures are not imitations of existing organic forms; I tend to combine elements of flora and fauna. I also tend to keep my forms relatively simple. My forms generally don't have defined legs, arms or heads like higher order vertebrate animals. Their bodies or forms are more likely to suggest sea cucumbers, squids, mollusks, or the seed pods and bulbs of plants. 

I usually made my forms relatively simple and sometimes repetitive (i.e. the form of the sculpture has similar bulbous forms growing or protruding). My surfaces are generally quite repetitive. I like to think of my forms logically (in a surreal, science fiction logic sort of way) as I build and finish them. Interior surfaces are distinct from exterior surfaces, edges fade into one another or change because of a change in form. The way I planned my forms for this project was to think about how mechanical elements might logically replace or enhance support as well as decorative elements of the form.

If an eccentric scientist on a different planet were to replace the physical support and reproductive organs of a science fiction plant, would the replacements mimic the shape of the original or would the new material require a new shape to achieve the same function?


sketch showing decorations elongated with different bike part extenders
thrown forms with bike part extender

While I've been working on this project, I have also been reading Umberto Eco's "History of Beauty" and I just finished Denis Dutton's "The Art Instinct." My considerations of the relation of "function" to form keeps coming up as I read these books. My work does not mimic nature, though I look to natural forms while I work. My work does not have a mechanical or biological function, though I keep considering function and nature as I design the forms. My work might more accurately be decorative and imaginative, but this isn't what I think hardest about when I am making it. 

bottom section finished with spaces for added decoration and with sprigged gear decorations attached
sprig mold made from a bike part, results shown above and below
The third bike part sculpture, like any of my work, evolved as I built and sketched and re-sketched and altered the form. I was thinking of the row of four spaces on the bottom as a place extravagant display, like flowers or colorful tail feathers. I thought of the rounded sections above as plants blossoms with mechanical stamen to be added later or as vessels that might tempt bugs in then capture them like venus fly traps or pitcher plants.

I also had to consider and design external mechanical elements as the form became more top-heavy. As I worked it was supported by towels, but the intention from the start was to provided a bike-part as support. As I worked, the piece became more extravagant at top and therefore heavier and less stable. Additional supports then needed to be added to the design.

base done, top part still being formed, at this point I hadn't decided how to finish the top section

temporarily placed bike part additions on top section

top section nearing completion

interior of top section, protruding ball for post-firing attachment

finished form before firing (wet or leather-hard clay)

bisque fired sculpture in kiln. sculpture required stilt supports because my kiln is small

bike part support trial run before throwing additional support bases


Monday, August 27, 2012

Bike Part with Clay: Gears

The big project I have been working on this summer involves incorporating bike parts into my ceramic sculptures. This project is a challenge for me in that I have to work differently and plan ahead more than usual. Generally when I start to work I have several pages of sketches and some photos of forms that I find interesting. These sketches and photos, kept around the studio, help me come up with some basic shapes of thrown or hand-built forms. I create a few general shapes and then work to combine and refine them, adding clay and building up to my finished form. During the summer I work on about 5 -7 pieces during a given two-week span, overlapping the work so that I can build on one piece while another dries.

SRAM bike parts

This summer my studio is more full than last and my time is more carefully planned out than usual. My studio is full of bike parts as well as sketches. I have bike parts in bins and boxes and also all over my work surfaces. I have been working on three major bike part pieces this summer, though I have some smaller pieces, a few test pieces and some functional objects I threw one week but haven't yet glazed.

early thrown forms that might develop into a bike part sculpture

The bike part integrated clay pieces require me to have an idea where the metal and plastic will go in the clay but I can't build these parts in directly. I need to plan for placement and then remove the pieces before firing. I also need to plan for shrinkage; the clay will shrink during drying and during firing. The metal and plastic parts, of course, will not shrink. If I were to build the bike parts into the sculpture, the shrinking clay would crack around the other material (as my friend Laura rediscovered to her detriment on another project). Of course if I fired the bike parts in the clay I would have other, stinkier, messier problems.

sketches planning potential bike part/clay sculptures

So what I do is sketch, build, test, build, sketch, test, build and refine. I am, essentially, building the clay part of my work the same as I would build it normally, but I have to plan where the bike parts will fit and how. I need to make openings that are around 10% larger than the bike part itself so that after shrinking the parts will still fit. I admit I have never been a big fan of measuring carefully. Part of the attraction of clay as a medium was (is) that I can fudge and sculpt over measurement errors. When I have worked with wood or even slabs of clay, I have frequently rediscovered that I am not a very exact measurer. I admire artists who can carefully plan, cut and build with straight, even and regular forms, but I haven't felt much motivation to emulate these artists in my own practice.

Partially built clay sculpture with initial bike part placement

This summer I have worked by building a little, based on a sketch, then adding a few bike parts as planned and squishing them into the clay. I move them around, lightly placing parts where I think they might fit before cutting or sculpting an attachment for them. As I work, I refine my sketches and adjust the parts again. The SRAM bike part project requires that I include at least 25 bike parts in the piece. I have, to some extent, been making this task more difficult because I am trying to make three pieces each with 25 parts. I am doing this because I've never done a project like this before. (I have integrated materials minimally, but the materials have generally been small or flexible--like hair.) I would be out of luck if my one and only bike part piece broke, so I am making three to lessen the possibility of disaster. I am am learning about the process as I go, so presumably the third piece will be best.

an older piece with hair. the hair doesn't need to fit "right" because it can be adjusted (unlike the bike parts)

The challenge of this project is most similar to my previous work with ceramic water fountains. The sculptural fountain forms were made exclusively from clay with a pump and hose to move the water up to the top of the fountain. The water recycled through the body of the sculpture into some form of a water container at the base. The fountains required a level of engineering to make sure the water recycled and didn't splash everywhere. The engineering required for the bike parts isn't the same, but it reminds me of doing the fountains. 

bike parts placed in cut-outs at the top of the sculpture-in-process

Here at the end of August I am nearing the end of my building time. The primary clay forms for the three sculptures have been built and bisque fired, some have been partially underglazed as well. I have a few wet pieces in the studio that are meant to be supports for these forms. I hope to finish these support pieces early this week (though my daughter's day care just called that she doesn't feel well) and then concentrate on glazing, firing and adding the bike parts in September.

gears integrated into this sculpture require the sculpture itself to be cut into pieces

The bike parts will have to be epoxied into the clay forms and some of the clay forms will be attached to one another via the bike parts. I am still planning more of a base support for the sculpture in this post, as I have only planned for about 15 pieces in the fired part of the form. I also had to build some notches into the interior of this sculpture so that there is more than just epoxy supporting the clay forms. 

the three (or four) gears pictured here require the sculpture to be cut or made in four (or five) different pieces

The tabs, holes and tubes inside the form will help hold the pieces in the correct placement as the epoxy sets. The sprigs on the surface of this form were made from a clay mold cast off of a bike part that is not being used in this particular sculpture. 

these pieces have one layer of underglaze on the exterior and will get another layer in some places before the next firing